Page 124 - HAND EMBROIDERY ARTISAN_TP

Fig 3 Fig 4

• Work layer by layer, following the contour of the
design.
• Constantly flip the fabric back and forth to check the
symmetry.
• If needed, make mirror corrections stitch by stitch.
Step 6: Thread changing Step 8: Final touches
• When changing thread: • After embroidery is done

- Finish with a tiny invisible backstitch embedded - Wash the shawl gently to remove design marks.
inside the fabric layers.
- Press the fabric under a cloth with a low-heat iron.
- Start the new thread from the same hole for
seamless continuation. - Inspect both sides carefully.
Step 7: Continue with the whole design (Fig 4) • Practice on a small swatch of cloth before working on
a full shawl.
• Work slowly and steadily across the shawl.
• Use a magnifying lamp or natural daylight for better
• Focus on: stitch control.

- Tension control • Begin with simple symmetrical motifs and progress
- Direction consistency to more intricate ones.
- No overlapping of stitches • Always keep hands clean to maintain the whiteness
of the Pashmina.

112 H & C: Hand Embroidery Artisan : (NSQF - 2024) Exercise 1.9.57